Toro Multi Pro 1750 Operator's Manual page 22

Figure 43
1. Straight-barbed fitting
2. Hose clamp
2. Secure the hose to the barbed fitting with a hose clamp
(Figure 43).
3. Assemble the free end of the hose 1.9 x 76 cm (3/4 x
30 inch) over the straight-barbed fitting at the back of
the 4–way valve (Figure
4. Secure the hose to the fitting with a hose clamp
43).
3. Hose 1.9 x 76 cm (3/4 x
30 inch)
43).
(Figure
11
Installing the Hose Between
the Pressure-Filter Assembly
and the 4-Way Valve
Parts needed for this procedure:
1 Hose 1.9 x 61 cm (3/4 x 24 inch)
2 Hose clamp
Procedure
Note: To insert the barbed fitting into the hose more easily,
apply a light coat of a non-petroleum-based lubricant, such as
vegetable oil to the barbed end of the fitting.
1. Assemble the hose 1.9 x 61 cm (3/4 x 24 inch) over
the 90° barbed fitting at the inboard side of the 4-way
valve (Figure 44).
2. Secure the hose to the fitting with a hose clamp
44).
1. Hose clamp
2. 90° barbed fitting
3. Assemble the free end of the hose over the
straight-barbed fitting and secure the hose to the fitting
with a hose clamp
22
Figure 44
3. Hose 1.9 x 61 cm (3/4 x
24 inch)
4. Straight-barbed fitting
(Figure 44).
(Figure