Monitoring The Power Supply - Nokia Check Point IP2450 Installation Manual

7
Installing and Replacing Components Other than Network Interface Cards (NICs) and Accelerated Data Path
4. Remove the grounding lugs.
5. Use the handles to gently pull the power supply out of the chassis.
6. Insert the new power supply into the empty bay.
7. Replace the grounding lugs.
8. Reinstall the two retaining screws.
9. Turn on power to the power supply.

Monitoring the Power Supply

You can monitor the status of the Check Point IP2450 appliance power supply with Check Point
Network Voyager. Similarly, you can also use the command-line interface (CLI). For
information about the CLI, see the CLI Reference Guide.
To monitor the power supply by using Check Point Network Voyager
1. Log on to the appliance by using Check Point Network Voyager.
2. Click Monitor.
3. Click Hardware Monitoring > System Status.
To the right of the Power Supply link, the status indicator is green for normal and red for
fault.
4. For more detailed information about the power supply status, click Power Supply.
116
7 0 0
W A
C
FA UL
T
OV ER
TE MP
PW R
OK
7 0 0
W A
C
FA UL
T
OV ER
TE MP
PW R
OK
Check Point IP2450 Security Platform Installation Guide
00630