Table of Contents
Advertisement
6
About IP2450 Appliance ADP Services
Modules
This chapter describes the Accelerated Data Path (ADP) services modules available for the
Check Point IP2450 appliance and how to connect those modules to your network. It includes
the following sections:
Installing and Replacing ADP Modules
Using ADP Transceivers in ADP Modules
Identifying ADP Module and Transceiver Types with Latch Lever Color Codes
Check Point ADP Module LED Reference Information
Configuring Check Point IPSO for IP2450 ADP Interfaces
Check Point IP2450 ADP modules help to accelerate firewall and VPN throughput. ADP is a
technology designed to forward packets at the highest possible rate. Check Point ADP modules
provide this technology by offloading processing from the CPU to network processors.
For IP2450 appliances, ADP is implemented with a single module on connections that benefit
from the Check Point SecureXL feature.
Note
You can use up to two ADP module at a time, and you can install single modules in either
slot 1 or 2.
One version of the module has built-in RJ-45 ports that provide 10/100/1000 Gigabit Ethernet
service. Other versions use swappable ADP transceivers to provide several different types of
services. Hardware configurations available from Check Point are described in the following
table.
ADP module type
Build in RJ-45
Check Point IP2450 Security Platform Installation Guide
Number of ports
Supported speeds
12
10/100/1000 Mbps
Supported ADP transceivers
n.a.
69
Advertisement
Table of Contents
