Table of Contents
Advertisement
1
Overview
Figure 7 Power Supply Status LED Location
Fan Unit
The IP2450 appliance fan unit is a single unit made up of eight individual fans to provide the air
flow required to maintain a proper operating temperature. The fan unit can provide proper
airflow for a short time even if an individual fan fails.
Caution
If an individual fan fails, replace the fan unit as soon as possible. For information about
how to replace a failed fan unit, see
The system status LEDs on the front panel of the appliance show the status of the fan unit. For
more information about the system status LEDs, see
Site Requirements
Before you install an IP2450 appliance, ensure that your computer room or wiring closet
conforms to the environmental specifications listed in
Safety Warnings and Cautions
Warning
Hazardous radiation exposure can occur if you use controls, make performance
adjustments, or follow procedures that are not described in this document.
Warning
To reduce the risk of fire, electric shock, and injury when you use telephone equipment,
follow basic safety precautions. Do not use the product near water.
26
Status LEDs
FAULT
OVER
TEMP
PWR OK
"Installing or Replacing a Fan Unit"
"System Status LEDs"
Appendix A, "Technical Specifications."
Check Point IP2450 Security Platform Installation Guide
00625
on page 112.
on page 19.
Advertisement
Table of Contents
