Configuring And Monitoring Using Snmp; Snmp Description; Snmp Configuration From The Nokia Ip40; Setting Up Snmp Access To The Nokia Ip40 - Nokia IP40 User Manual

9
Configuring and monitoring using
SNMP
This chapter provides information on configuring the Simple Network Management Protocol
(SNMP) and how to use SNMP to manage the Nokia IP40.
This chapter covers the following topics:

"SNMP Description"

!

"SNMP Configuration from the Nokia IP40"

!

"Setting up SNMP access to the Nokia IP40"

!
"Configuring the SNMP Parameters"
!
! "Configuring SNMP Parameters from the Command-line Interface"
SNMP Description
The Simple Network Management Protocol (SNMP) is a de-facto industry standard for
monitoring and management of devices on data communication networks, telecommunication
systems and other globally reachable devices. Practically every organization dealing with
computers and related devices expects to be able to centrally monitor, diagnose and configure
each such device across local and wide area networks. SNMP is the protocol that enables this
interaction.
SNMP Configuration from the Nokia IP40
You can use the Nokia IP40 GUI portal and the command-line interface to set, change and view
parameters for SNMP.
Setting up SNMP access to the Nokia IP40
You should specifically allow or disallow SNMP manager software running outside your
network from monitoring the IP40.
Nokia IP40 User Guide
on page 103
on page 104
on page 103
on page 103
on page 105
103