Table of Contents
Advertisement
1
Overview
Power Supplies and Fan Unit
The power supplies and fan unit are located at the rear of the IP2450 appliance, as shown in
Figure 5
Figure 5 Power Supply and Fan Unit Locations (AC version)
Figure 6 Power Supply and Fan Unit Locations (DC version)
Power Supplies
The Check Point IP2450 appliance supports up to two power supplies for power sharing and
redundancy. The IP2450 comes with two power supplies as the standard package. The power
supplies are hot swappable and perform load sharing while two active power supplies are
installed, increasing the life of the power supplies.
24
and
Figure
6.
Power supplies
700W AC
700W AC
Power cord receptacle
Power supplies
700W AC
+
—
700W AC
+
—
Power connections
Status LEDs
FAULT
OVER
TEMP
PWR OK
FAULT
OVER
TEMP
PWR OK
Power switches
Status LEDs
FAULT
OVER
TEMP
PWR OK
FAULT
OVER
TEMP
PWR OK
Power switches
Check Point IP2450 Security Platform Installation Guide
00623
Fan unit
00624
Fan unit
Advertisement
Table of Contents
