Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual page 5

Adjust the media size for the bulk paper
Load the media into the
Load the media into the special feeder (multipurpose
Loading
Loading tab
Load tab paper into the paper
Removing paper
Check the status of the punch waste
Remove the punch waste of the punch
Remove the trim
Toner.......................................................................................................299
Check the status of the toner reservoir and waste toner
Replace the toner
Staples.....................................................................................................306
Check the status of the staple
Replace the staple cartridge in the stapler
Replace the staple cartridge in the saddle stitch
Chapter 10
Adapt printer settings to your
System settings (access through the operator
Introduction to the 'Setup'
Work with the workflow
Change the warning
Disable the warning
Truncate the job
Adjust the brightness and contrast of the operator
Access Settings Editor settings via the operator
Automated workflows (access through the Settings
Introduction to automated
Add an automated
Edit an automated
Delete an automated
Restore the factory default
Hotfolders................................................................................................337
Introduction to
Activate the hotfolder
Create a
Create a shared network folder on a
Create a hotfolder default ticket
Chapter 11
Maintenance and
Introduction to the 'Maintenance'
Routine cleaning.....................................................................................346
inserter.....................................................272
transparencies....................................................................285
paper............................................................................287
waste..........................................................................292
waste....................................................................296
cartridge.............................................................301
needs............................................................317
profiles.....................................................320
time................................................................324
time.................................................................325
name.....................................................................326
workflow...........................................................333
workflow...........................................................334
workflow.......................................................335
hotfolders................................................................337
function........................................................338
hotfolder.............................................................................339
calibration.........................................................................343
module..........................263
tray.................................................289
box.......................................292
unit..................................293
cartridges........................................306
unit.............................308
panel)........................318
section..................................................318
workflows............................................331
workflow..............................................336
workstation..........................340
('default_ticket.jdf').....................342
section...........................................344
tray).........278
container.299
unit....................312
panel............327
panel.................328
Editor)..............331
Contents
5