Change The Job Settings Before Printing; Change The Number Of Sets - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual
Color digital multifunction imaging system
Hide thumbs
Also See for imageRUNNER ADVANCE C9075S PRO:
- Customer expectation document (56 pages) ,
- Safety instructions (48 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Change the job settings before printing
Change the number of sets
Introduction
Follow the procedure below to change the number of sets for a job that is present in the
list of 'Waiting jobs' or 'Scheduled jobs'.
How to change the number of sets
Touch -> 'Waiting jobs'.
1.
Touch the job of which you want to change the number of sets.
2.
#
NOTE
You can only change the settings of the active print job
printer (press the 'Stop' button two times).
Touch 'Properties', or touch the job two times to open the 'Properties' window.
3.
Touch the 'Number of sets' button.
4.
Enter the desired number of sets (between 1 and 65,000).
5.
#
NOTE
Touch the arrow button <- to correct the previous entry or touch 'Cancel' to close
the numerical keyboard without saving the changes.
Press 'OK'.
6.
Press 'OK'.
7.
Change the number of sets
after you stopped the
Chapter 6 - Print jobs
151
Advertisement
Table of Contents
