Combine Subsets Into 1 Document - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual

Combine subsets into 1 document

Combine subsets into 1 document
Introduction
A subset is an original you want to copy. A subset can be a single sheet or a full document.
Each subset can require different settings for the original and the output. To create 1
document from several subsets, you can use the Combined copy job template in the
'Copy/Scan' section. You also need this template when you want to use tab sheets to split
up the subsets. Then each tab sheet is also considered to be a subset.
After you created 1 document, you can still add, insert, delete or edit a subset.
How to combine subsets into 1 document
Place the first subset face up into the ADF.
1.
Touch 'Jobs' -> 'Copy/Scan' -> 'Combined copy job'.
2.
Define the settings for the subset (both in the 'Original' and 'Output' section).
3.
Press .
4.
Place the next subset face up into the ADF.
5.
Repeat the steps 3-4 for all subsequent subsets.
6.
Touch 'Ready' after you scanned the last subset.
7.
Touch
8.
or delete a subset.
202 Chapter 7 - Copy jobs
to start the copy job or touch 'Edit' to check the document first or to add, insert