Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual page 281

#
IMPORTANT
• When loading paper into the special feeder, align the paper stack neatly between
the slide guides. If the paper is not loaded correctly, a paper jam may occur.
• When loading paper into the special feeder, make sure the paper is placed down
flat. The paper may not be able to be fed if the slide guides are set to a size smaller
than the paper, causing it to curve upward.
• If you are printing on heavyweight paper or envelopes using the special feeder and
find that the paper or envelopes are not being fed smoothly or evenly through the
special feeder, remove the paper or envelopes, curl the feeding edges upward ap-
proximately 3mm / 1/8", then reload the paper or envelopes. Curling the feeding
edges enables the rollers to grip the paper or envelopes as they are fed into the
special feeder.
#
NOTE
•
If there are instructions on the paper package about which side of the paper to
load, follow those instructions.
• When the paper is loaded into the special feeder, the side facing up is the one
printed on.
• If problems, such as poor print quality or paper jams occur, try turning the paper
stack over and reload it.
If you are loading envelopes into the special feeder:
• Take five envelopes, loosen them as shown, then stack them together. Repeat this step
five times for each set of five envelopes.
Load the media into the special feeder (multipurpose tray)
Chapter 9 - Paper, toner, and staples 281