Introduction
Routine cleaning
Introduction
Introduction
If the original is not copied clearly, clean the following parts of the printer. For high-
quality printouts, we recommend cleaning these parts once or twice a month.
•
Glass plate
•
Feeder and the underside of the feeder
•
Rollers
•
Wires
•
Drums
•
Control panel
Warnings
#
•
When cleaning the printer, first turn OFF the main power switch, then dis-
connect the power cord. Failure to follow these steps may result in a fire or
electrical shock.
•
Do not use alcohol, benzene, paint thinner, or other solvents for cleaning.
Doing so may result in damage to the plastic parts.
•
Disconnect the power cord from the power outlet regularly, and clean the
area around the base of the power plug's metal pins and the power outlet
with a dry cloth to ensure that all dust and grime is removed. If the power
cord is connected for a long period of time in a damp, dusty, or smoky loca-
tion, dust can build up around the power plug and become damp. This may
cause a short circuit and result in a fire.
346
Chapter 11 - Maintenance and calibration
WARNING