Activate The Hotfolder Function - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual
Color digital multifunction imaging system
Hide thumbs
Also See for imageRUNNER ADVANCE C9075S PRO:
- Customer expectation document (56 pages) ,
- Safety instructions (48 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Activate the hotfolder function
Activate the hotfolder function
Introduction
The information in this section is intended for system administrators.
#
NOTE
•
By factory default, the hotfolder function is disabled. To use the hotfolder function,
the system administrator must activate this function once. After the system admin-
istrator activated the hotfolder function, up to 10 hotfolders can be defined.
•
For this procedure, the System administrator password is required.
How to activate the hotfolder function
Open the web browser and enter the host name or IP address of your PRISMAsync
1.
controller.
Go to the 'Workflow' -> 'Hotfolders' section.
2.
Click 'Configure'.
3.
At 'Enabled', select 'Yes' to activate the hotfolder function.
4.
Enter a unique 'Hotfolder user name' and 'Hotfolder password'.
5.
Make sure that you filled in the user name and password before you continue with the
next step.
Click 'OK' to confirm the activation of the hotfolder function.
6.
A confirmation window opens.
Click 'OK' to restart the controller now.
7.
338
Chapter 10 - Adapt printer settings to your needs
Advertisement
Table of Contents
