Orientation
[299] Vertical placement
1 Place the original face up
#
NOTE
•
A4, A5, B5, LTR, and STMT originals can be placed either vertically or horizon-
tally. However, the scanning speed for horizontally placed originals is somewhat
slower than that of vertically placed originals.
•
Horizontally placed A4, A5, B5, LTR, and STMR originals are referred to as A4R,
A5R, B5R, LTRR, and STMTR.
•
A3, B4, 11" × 17", and LGL originals must be placed horizontally.
Feeding originals to the ADF
Adjust the slide guides to fit the size of your originals.
1.
Neatly place your originals, with the side to be copied face up, into the original supply
2.
tray.
#
1
Feeding originals into the ADF
1
[300] Horizontal placement
1 Place the original face up
Chapter 7 - Copy jobs
195