Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual page 110

Description of the print job settings
'Output' settings - 'Print delivery'
#
Setting
'Print deliv-
ery'
110 Chapter 6 - Print jobs
Values Description
'Output loca- Select the output location for the job. Depending on
tion' the settings for your print job, the machine automati-
cally suggests the preferred output location for your
job. However, you can manually overrule this sugges-
tion.
• 'Stacker/stapler upper tray'
Deliver the prints at the upper tray of the stack-
er/stapler.
• 'Stacker/stapler lower tray'
Deliver the prints at the lower tray of the stack-
er/stapler.
•
'Stacker/stapler booklet tray'
Deliver the prints at the booklet tray of the stack-
er/stapler.
• 'Folder main tray'
Deliver the folded prints to the tray at the bottom
of the folder.
'Sort'
'By page'
The output is sorted by page.
'By set'
The output is sorted by set.
'Offset stack- This setting is only available when the 'Offset stacking'
ing' setting is set to 'Sets (as in job)' in the workflow pro-
file.
'On'
Each set delivered to an output location will have a
small shift on top of the previous set. This makes it
easier to recognize individual sets.
'Off'
All the sets or jobs that get to an output location are
stacked in a straight stack.