Create a hotfolder
Introduction
The information in this section is intended for key operators.
#
NOTE
•
You can create up to 10 hotfolders.
•
For this procedure, the Key operator PIN is required.
Before you begin
The hotfolder function must be activated. Otherwise, the system administrator must ac-
tivate the hotfolder function first.
How to create a hotfolder
Open your web browser and enter the host name or IP address of your PRISMAsync
1.
controller.
Go to the 'Workflow' -> 'Hotfolders' section.
2.
Click 'Add'.
3.
Give the hotfolder a logical name.
4.
Select the workflow folder to which you want to link.
5.
Click 'OK'.
6.
Chapter 10 - Adapt printer settings to your needs
Create a hotfolder
339