Shift the image roughly to create binding space
Introduction
If you want to create space for staples or punch holes, for example, you can use the 'Align'
function. The preview in the right-hand pane of the operator panel displays the conse-
quences of your changes.
You can also shift the image or margin more precisely.
How to change the alignment
Touch 'Jobs' -> 'Waiting jobs'.
1.
Touch the job you want to change.
2.
#
NOTE
You cannot change this setting for the active print job .
Touch 'Properties' - or touch the job 2x to open the 'Properties' window.
3.
Touch the 'Align' button.
4.
Make the required changes.
5.
Press 'OK'.
6.
Press 'OK'.
7.
•
Shift the image precisely to create binding space or correct the layout, on page 164
Shift the image roughly to create binding space
Chapter 6 - Print jobs
163