Adjust The Media Size For The Paper Module - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual
Color digital multifunction imaging system
Hide thumbs
Also See for imageRUNNER ADVANCE C9075S PRO:
- Customer expectation document (56 pages) ,
- Safety instructions (48 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Adjust the media size for the paper module
Adjust the media size for the paper module
Introduction
This section explains how to change the paper size in the optional Multi-Drawer Paper
Deck-A1.
Adjust the media size for paper module
Press the button on the paper deck that you want to adjust, and pull out the paper deck
1.
until it stops. Slide the paper holder plate until it does not catch onto the paper you are
setting, then remove all the remaining paper.
The paper holder plate slides by holding it as shown in the diagram.
#
NOTE
It may take some time for the paper deck to open, even when pressing the Open
button.
252
Chapter 9 - Paper, toner, and staples
Advertisement
Table of Contents
