Load The Media Into The Bulk Paper Modules - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual
Color digital multifunction imaging system
Hide thumbs
Also See for imageRUNNER ADVANCE C9075S PRO:
- Customer expectation document (56 pages) ,
- Safety instructions (48 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Load the media into the bulk paper modules
Introduction
The bulk paper module (Paper Deck Unit-A1/POD Deck Lite-A1) allows you to load
up to 4000 sheets of paper (64 g/m
lb bond).
#
When loading paper, take care not to cut your hands on the edges of the paper.
#
IMPORTANT
•
If the printer is in Sleep mode, you may not be able to open the bulk paper module.
In this case, press the Sleep Mode key on the operator panel to reactivate the
printer, then press the Open button on the bulk paper module.
•
Never place paper or other items into the empty part of the paper deck next to
the paper stack. Doing so may cause paper jams.
•
A paper blower is attached inside the paper deck. Do not insert paper clips or
other foreign objects into the blower.
•
Paper jams may occur if you load paper into Paper Deck Unit-A1/POD Deck
Lite-A1 in a low humidity environment. If paper jams occur, follow the instructions
on the touch panel display to remove the jammed paper. In addition, make sure
that the loaded paper is not curled. Paper curls must be straightened out prior to
loading.
•
A screen asking you to load paper also appears if the paper deck is not fully inserted
to the printer. Make sure the paper deck is properly in place.
•
Do not load the following types of paper into the paper deck. Doing so may cause
a paper jam.
- Severely curled or wrinkled paper
- Thin straw paper
- Paper which has been printed on using a thermal transfer printer (Do not print
on the reverse side of this paper either.)
•
Fan the stack of paper well before loading it, and align the edges of the paper stack
on a flat surface.
•
Paper Deck Unit-A1 can only accommodate paper from 52 to 220 g/m² / 14 lb
bond to 80 lb cover in weight.
•
POD Deck Lite-A1 can only accommodate paper from 52 to 300 g/m² / 14 lb
bond to 110 lb cover in weight.
Load the media into the bulk paper modules
2
/ 17 lb bond) or 3500 sheets of paper (80 g/m
CAUTION
Chapter 9 - Paper, toner, and staples
2
/ 20
257
Advertisement
Table of Contents
