Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual page 265
Color digital multifunction imaging system
Hide thumbs
Also See for imageRUNNER ADVANCE C9075S PRO:
- Customer expectation document (56 pages) ,
- Safety instructions (48 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Align the outer size change plate with the marks for the desired paper size that you want
7.
to load.
(SRA3)
320mm
450mm
330mm
483mm
13 19
5
11
12 /
17 /
8
16
305mm
457mm
A4/A3
12 18
11 17/LTR
B5/B4
A4
R
LGL/LTR
R
#
IMPORTANT
•
Make sure to align the outer size change plate with the marks for the desired paper
size. There are two locations with marks for the paper size on the top of the outer
size change plate. Align the outer size change plate with the desired marks.
•
Make sure that the size change plate is properly aligned with the marks for the
desired paper size. If the size change plate is not properly aligned, Pod Deck Lite
may become damaged.
Fix the outer size change plate with the two blue screws using a coin or something similar,
8.
while slightly holding its centre front portion and pressing it towards you.
•
Fix the screws by turning them clockwise.
•
Fasten the left blue screw before fastening the right blue screw.
Adjust the media size for the bulk paper module
Chapter 9 - Paper, toner, and staples
265
Advertisement
Table of Contents
