Load the media into the special feeder (multipurpose tray)
If you are feeding large paper, pull out the auxiliary tray.
Load the paper into the special feeder.
3.
Make sure the height of the paper stack does not exceed the loading limit mark ( ).
When you use the special feeder to make copies, straighten curled paper prior to use, as
shown below. Curled paper may cause a paper jam.
To print on the back of preprinted paper, straighten curled paper and load the preprinted
paper face up into the special feeder, as shown in the illustration below.
After the rst one sided
copy is made
280
Chapter 9 - Paper, toner, and staples
Feeding Direction
Output Direction
Feeding Direction
When copying on the back
side of a preprinted sheet