Select A Different Media For A Job - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual

Select a different media for a job

Introduction
If you want to print a job on other media than originally defined for that job, you can
select a different media via the operator panel. Requirements regarding the new media:
•
The media must be available in the 'Media catalog'.
• The media must have the same size as the original media.
How to select another media for a job
Touch 'Jobs' -> 'Waiting jobs'.
1.
Touch the job you want to change.
2.
#
NOTE
You can only change the settings of the active print job
printer (press the 'Stop' button two times).
Touch 'Properties', or touch the job two times to open the 'Properties' window.
3.
In the preview pane at the right-hand side, touch the media you want to change.
4.
When more than 1 media was defined for a job, the preview pane displays a separate
button for each media.
From the list, select the new media.
5.
Press 'OK'.
6.
Press 'OK'.
7.
Select a different media for a job
after you stopped the
Chapter 6 - Print jobs 161