S800 I/O Modules - ABB ACS5000 User Manual

ABB
10.5.3

S800 I/O modules

5k A UM
LEDs on I/O modules having the same meaning on all types of I/O
modules are always at the same position. The LEDs are always located at
the topmost position on each module
as follows:
■ F: fault
■ R: run
■ W: warning
■ O or OSP (only output modules).
LED Color
F Red
R Green
W Yellow
O (OSP) Yellow
- Yellow
Fig. 10-4 Example of S800 I/O station
For further information, see the following manuals:
■ S800 I/O - General information and installation, user's guide
■ S800 I/O - Modules and termination unit, user's guide
3BHS221906 ZAB E01 Rev. D
Chapter 10 - Preventive and corrective maintenance
(Fig. 10-4: arrows)
Meaning
Fault Indicates malfunction
Run Device is operating normally
Warning External fault or minor fault in the module
- (Output Set as Predetermined)
Indicates an active signal
- Indicates an active signal
and are identified
10-11 (36)