ABB
Drive and non-integrated transformer
Drive
Transformer
5k A UM
•
Connect the secondary cables of the transformer, and the motor
cables to their corresponding busbars.
•
Connect the secondary cables of the transformer to the side of the
busbars where the arrows point to in
•
Orientate the bolts for the transformer primary cables as shown in
6-8.
Fig. 6-8
Cable connection and bolt orientation
•
Connect the primary and the secondary cables of the transformer to
their corresponding busbars.
•
Connect the cables to the side of the busbars where the arrow points
to in
Fig.
6-9.
•
Orientate the bolts as shown in
Fig. 6-9
Cable connection and bolt orientation
3BHS221906 ZAB E01 Rev. D
Chapter 6 - Electrical installation
Fig.
6-8.
Fig.
6-9.
Fig.
6-13 (22)