ABB ACS5000 User Manual page 117

ABB
Fault memory
Control panel overview
5k A UM
For the complete list of selectable actual signals, see
parameter table.
The fault memory display provides information on the 64 most recent fault
events that occurred in the drive. It displays the name of the fault and the
time it occurred. For instructions on how to display and reset the fault
memory, see 9.5.7 Displaying and resetting an active
When the drive generates a fault or alarm, the corresponding message
displays immediately.
Changing from the fault memory mode to other modes is possible without
resetting the fault first. When no keys are actuated, the fault or warning
text is displayed as long as the fault is active.
600.0 rpm
1 L ->
ReadyOn
StateINU
MOTOR SP 0.00 rpm
POWER
0.0 kW
3BHS221906 ZAB E01 Rev. D
Chapter 9 - CDP control panel
Signal and
fault.
1 Status line
2 Actual signal names and values
3 Selection key for actual signals
mode
4 Fast navigation key for selecting
the actual signals display or the
1
fault memory display
5 Slow navigation key for selecting
2
signals or fault messages
6 Enter key for confirming the
selection
3
4
5
6
9-5 (24)