Target Groups And Required Qualifications - ABB ACS5000 User Manual

ABB

Target groups and required qualifications

Handling
Mechanical installation
Electrical installation
Operation
Maintenance
5k A UM
The drive presented in this manual is part of an industrial environment
where voltages are present that contain a potential hazard of electric
shock and / or burn. For this reason, only personnel who have a thorough
knowledge of the drive and the industrial environment and have obtained
the required qualification must handle, install, operate, or maintain the
drive.
The manual addresses personnel who are responsible for unpacking,
transportation, installation, operation and maintenance of the drive. The
personnel must carry out the below listed tasks in a manner that does not
cause physical harm or danger, and to ensure the safe and reliable
functioning of the drive.
Commissioning of the drive must only be performed by qualified and
certified ABB personnel.
The personnel must be skilled and experienced in unpacking and
transporting heavy equipment.
The personnel must be qualified to prepare the installation site according
to the site and equipment requirements and to perform the installation
accordingly.
The personnel must have a sound knowledge of the relevant electrical
codes and specifications covering low and medium voltage equipment,
be experienced with electrical wiring principles, and know the electrical
symbols typically used in wiring diagrams.
The personnel include all persons who operate the drive from the local
operating panel of the drive. The personnel must know the functions of the
operating panel, be adequately trained for the drive, and know the driven
process. Special knowledge of frequency converter technology is not
required.
The personnel include all persons who
■ are qualified to carry out preventive and corrective maintenance on
drive as described in this manual,
■ are thoroughly familiar with the drive,
■ have a sound knowledge of the relevant electrical codes and
specifications covering low and medium voltage equipment,
■ are able to assess the hazards associated with the energy sources of
the drive system and act correspondingly,
■ know the safe shutdown and grounding procedures for the drive
system.
3BHS221906 ZAB E01 Rev. D
General information on manual and equipment
3 (8)