3 Installing RRU and SRXU Hardware
Instruments
3.4 Installing the RRU on the Ground or Rooftop
When the RRU needs to be installed on the ground or rooftop, it supports one-module, two-
module centralized, and three-module centralized installation modes.
3.4.1 Installing a Single RRU
This describes how to install a single RRU module and its mounting plate. The single RRU can
be installed on a metal pole or wall.
3.4.1 Installing a Single RRU
This describes how to install a single RRU module and its mounting plate. The single RRU can
be installed on a metal pole or wall.
Procedure
Step 1 Install the mounting plate of the RRU. The operation varies with the installation mode.
If...
The RRU needs to be installed on a metal
pole,
The RRU needs to be installed on a wall,
Step 2 Perform the operations in
----End
Installing the Mounting Plates of the Single RRU on the Metal Pole
This describes how to install the mounting plates on the metal pole.
Prerequisite
The metal pole is ready and the pole diameter is between 60 mm and 114 mm.
Procedure
Step 1 Determine the position of the mounting plate by referring to the engineering design and
Space Requirements of the RRU and
3-30
Multimeter, 500 V megohmmeter (for testing insulation resistance), BER
tester, and optical power meter
NOTE
The instruments must be checked and certified before put into use.
3.4.1.3 Installing the Single RRU
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Then...
Go to
3.4.1.1 Installing the Mounting Plates
of the Single RRU on the Metal
Go to
3.4.1.2 Installing the Mounting Plate
of the Single RRU on the
Module.
SRXU.
RRU
User Guide
Pole.
Wall.
3.1.2
Issue 01 (2008-04-18)