Preparing For The Nodeb Installation; Unpacking Inspection For The Nodeb - Huawei RRU User Manual

RRU
User Guide
l
l
Step 3 Check whether the SRXU needs to be installed. Perform the next step accordingly.
If...
The SRXU needs to be installed,
The SRXU does not need to be installed,
Step 4 Install the SRXU. For details, refer to
Step 5 Install RRU and SRXU cables. For details, refer to
Step 6 Check RRU and SRXU hardware installation. For details, refer to
Hardware
Step 7 Install the housing of the RRU and SRXU. For details, refer to
the RRU and
----End

3.3 Preparing for the NodeB Installation

This describes how to prepare for the NodeB installation. Before installing the NodeB, you need
to unpack the NodeB and prepare necessary tools.

3.3.1 Unpacking Inspection for the NodeB

This describes how to unpack the NodeB and check the integrity of the equipment. This is a
prerequisite for the successful installation.
3.3.2 Tools and Instruments for NodeB Installation
This describes the general tools, special tools, and instruments required for the NodeB
installation.
3.3.1 Unpacking Inspection for the NodeB
This describes how to unpack the NodeB and check the integrity of the equipment. This is a
prerequisite for the successful installation.
Issue 01 (2008-04-18)
3.4 Installing the RRU on the Ground or Rooftop
If...
Only one RRU needs to be installed,
Two RRUs need to be installed,
Three RRUs need to be installed,
3.5 Installing the RRU on the Tower
Installation.
SRXU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3 Installing RRU and SRXU Hardware
Then...
Go to 3.4.1 Installing a Single
Go to 3.4.2 Install Two
Go to 3.4.3 Install Three
3.6 Installing the SRXU.
3.7 Installing RRU and SRXU
RRU.
RRUs.
RRUs.
Then...
Go to Step 4.
Go to Step 5.
Cables.
Checking RRU and SRXU
3.9 Installing the Housing of
3-27