Figure 3-18 Cable Connections Of One Rru Without The Srxu - Huawei RRU User Manual

3 Installing RRU and SRXU Hardware

Figure 3-18 Cable connections of one RRU without the SRXU

3-20
NOTE
When one RRU is installed, the PGND cable is connected to the grounding bolt on the RRU module.
l
The AISG multi-wire cable connects the RRU to the RCU. When the distance between the RRU and
l
the RCU is too long, the AISG extension cable is used between the AISG multi-wire cable and the
RCU.
The antenna jumper directly connects the RRU to the antenna. When the distance between the RRU
l
and the antenna is longer than 14 m, the feeder is required.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
RRU
User Guide
Issue 01 (2008-04-18)