Figure 3-16 Installing The Cable Clip On The Tower - Huawei RRU User Manual

3 Installing RRU and SRXU Hardware
l
l
l
Figure 3-17
3-18
The clip should be vertical to the cables and should not be bent. The cables fastened by the
same clip should be parallel, as shown in

Figure 3-16 Installing the cable clip on the tower

Do not fasten the screws on the clip until the cables are properly arranged and routed.
shows routing the cables in the cable rack.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Figure 3-16.
RRU
User Guide
Issue 01 (2008-04-18)