Installing Ground Cables - Huawei iSitePower-M User Manual

iSitePower-M (MAP05A1, MAB05B1)
User Manual
● Cables with high rigidity, such as armored cables, are not recommended.
● Before assembling connectors, label the cable polarities correctly to ensure
● A PV-CZM-41100 crimping tool is recommended.
● Use the wrench shown in the figure to tighten the locking nut. When the
● After crimping the positive and negative metal terminals, pull the PV input
● Insert the crimped metal terminals of the positive and negative power cables
Figure 7-4 Preparing a PV input power cable

7.2 Installing Ground Cables

Precautions
Ensure that the ground cable is securely connected. Otherwise, electric shocks may
occur.
Procedure
Step 1 Install ground cables.
Issue 02 (2021-12-30)
NO TICE
correct cable connections.
wrench slips during the tightening, it indicates that the locking nut has been
tightened.
power cables to ensure that they are connected securely.
into the appropriate positive and negative connectors. Then pull the PV input
power cables to ensure that they are connected securely.
D ANGER
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 Electrical Connection
62