Figure 3-26 Label For The Rru Alarm Cable (Unit: Mm); Figure 3-27 Label For The Bbu Alarm Cable (Unit: Mm); Figure 3-28 Leading Cable Ties Through The Holes - Huawei RRU User Manual

RRU
User Guide
Attaching a Label to a Cable
1.
Issue 01 (2008-04-18)

Figure 3-26 Label for the RRU alarm cable (unit: mm)

Quantity of delivered labels: quantity of BBU alarm cables x 2
Installation positions of the labels: near the cable hole where the BBU alarm cable is routed
out of the cabling cavity
A label is attached near the cable hole where the BBU alarm cable is routed out of the
cabling cavity. X ranges from 0 to 5, indicating BBU0 through BBU5, as shown in
3-27.

Figure 3-27 Label for the BBU alarm cable (unit: mm)

Lead a cable tie through each pair of holes in the label, as shown in
ties should be led in the same direction for better appearance.

Figure 3-28 Leading cable ties through the holes

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3 Installing RRU and SRXU Hardware
Figure 3-28. The cable
Figure
3-25