Wiring; Recommended Cables; General-Use Type And Intrinsically Safe Type - GE FVP110 Maintenance Manual

GE Energy

Wiring

Recommended Cables

For wiring for a FVP110:
❑
Use a cable for H1 fieldbus segments specified by the Fieldbus FOUNDATION™.
A shielded cable is recommended. For the details of cables required for H1
fieldbus segments, see Fieldbus Technical Information (TI 38K3A01-01).
❑
Choose cables suitable for the respective ambient temperature ranges, especially
when they are to be laid in a hot or cold place.
❑
Laying cables in or through a place where the atmosphere may include a toxic gas
or liquid, or oil or solvent requires wires and cables made of sufficient durability.
❑
Prevent the cables from being affected by noise induced from a high-capacity
transformer or power supply to a motor.
❑
Make the cables and connection adapters watertight and prevent the cables from
being damaged by using a cable conduit and duct.

General-use Type and Intrinsically Safe Type

1. Remove the terminal box cover and dust proofing plug (Figure 33). Be sure to
securely seal the unused wiring port with a blind plug.
For flameproof equipment, wiring materials and wiring work
CAUTION
for this equipment including peripherals are strictly restricted.
Read "Installation and Operating Precautions for JIS
Flameproof Equipment" prior to the work.
Figure 33 Wiring
FVP 110 Fieldbus Valve Positioner Manual
54