Parameters Of Di Block; Di Block Parameters - GE FVP110 Maintenance Manual

Parameters of DI Block

Relative Index
Index
29 5029 UPDATE_
EVT
30 5030 BLOCK_ALM
Parameters of DI Block
Relative Index
Index
DI1 DI2
0 6000 6100
1 6001 6101
2 6002 6102
3 6003 6103
4 6004 6104
5 6005 6105
6 6006 6106
7 6007 6107
Table 62 AO Block Parameters (Continued)
Parameter Default
Name (factory
setting)
–
–
Table 63 DI Block Parameters
Parameter Default
Name (factory
setting)
Block Header
ST_REV 0
TAG_DESC Spaces
STRATEGY 1
ALERT_KEY 1
MODE_BLK O/S
BLOCK_ERR —
PV_D —
Write
—
Shows the contents of an update event
upon occurrence.
—
Shows the contents of a block alarm upon
occurrence.
Write
Block Tag Information about this block, including the
=O/S block tag, DD revision, execution time
— Incremented when a change is made to the
parameter settings for the AO block to indicate
the revision level of the settings, and used to
see whether there is a change in parameter
settings.
Universal parameter storing the description of
the tag
Universal parameter used by an upper-level
system to classify the function blocks
Universal parameter used as a key to identify
the point from which an alert is issued;
normally used by an upper level system to
select alerts to provide to a particular operator
who covers a specific area of the plant.
Universal parameter that indicates the block
operation conditions and is composed of actual
mode, target mode, permitted modes, and
normal mode.
— Indicates the error statuses related to the block
itself.
— Indicates the primary discrete value (or the
corresponding process value) used to execute
the specified actions, and the status of that
value.
201
Function Block Parameters
Description
Description