Mounting And Wiring; Introduction - GE BAKER HUGHES Masoneilan SVi 1000 Quick Start Manual

Table of Contents

3. Mounting and Wiring

This section describes how to mount and wire the SVi1000, which includes:

"Step 1: Mounting the SVi1000" on page 21.

"Mounting the SVi1000 on Rotary Valves" on page 22

"Mounting the SVi1000 on Reciprocating Valves" on page 27

"Step 2: Connecting the Tubing and Air Supply" on page 31

"Step 3: Wiring the SVi1000" on page 32

WARNING

CAUTION

Failure to adhere to the requirements listed in this

manual may cause loss of life and property.

Before installing or using this instrument, READ

THE INSTRUCTIONS CAREFULLY. Refer to

"Hazardous Location Installation and Declaration

of Conformity" on page 72 for detailed instructions.

Do not connect a non-intrinsically safe approved

PC or HART

modem to an intrinsically safe circuit

except on the safe area side of the barrier. Do not

operate a PC in a hazardous area without

compliance to local and plant

regulations."Hazardous Location Installation and

Declaration of Conformity" on page 72

For units with optional switches refer to "Optional

Switch Load Limits" on page 59.

Masoneilan SVi1000 Positioner Quick Start Guide =| 19

Table of Contents