Mounting And Wiring; Introduction - GE SVi 1000 Masonelian Quick Start Manual

Table of Contents

3. Mounting and Wiring

This section describes how to mount and wire the SVi1000, which includes:

"Step 1: Mounting the SVi1000" on page 23.

"Mounting the SVi1000 on Rotary Valves" on page 24

"Mounting the SVi1000 on Reciprocating Valves" on page 29

"Step 2: Connecting the Tubing and Air Supply" on page 33

"Step 3: Wiring the SVi1000" on page 34

WARNING

CAUTION

Failure to adhere to the requirements listed in this

manual may cause loss of life and property.

Before installing or using this instrument, READ

THE INSTRUCTIONS CAREFULLY. Refer to

"Hazardous Location Installation and Declaration

of Conformity" on page 72 for detailed instructions.

For units with optional switches refer to "Optional

Switch Load Limits" on page 61.

Do not connect a HART

control circuit unless the controller is HART

compatible or has a HART

a process upset may occur if the controller output

circuit is not compatible with a HART

Masoneilan SVi1000 Positioner Quick Start Guide =| 21

modem and PC to a

filter. Loss of control or

signal.

Table of Contents