Table of Contents
Advertisement
78/407
Technical data of the components
Technical design
Type of construction of motor
Housing varnish
Vibration severity level (vibration
quality)
Concentricity, run-out and align‐
Flange
Output shaft, shaft end and cen‐
tering hole
Bosch Rexroth AG R911335703_Edition 04
Type of construction of motor B5 according to EN 60034-7
Black, RAL 9005
A, according to EN 60034-14: 2004
According to DIN 42955, ed. 12.81 (IEC 60072-1)
ment
Encoder
S1, S3, M1, M3
Tab. 5-4:
Tolerance for concentricity, run-out and alignment, depending on en‐
coder option
According to DIN 42948, ed. 11.65
Motors with keyway have been balanced with the complete key. The machine
element to be driven has to be balanced without a key.
Shaft end cylindrical, acc. to DIN 748 Teil 3, ed. 07.75 (IEC 60072-1)
Centering hole, according to DIN 332 Teil 2, ed. 05.83
Type
KSM02.1B-041
KSM02.1B-061
KSM02.1B-071
KSM02.1B-076
Tab. 5-5:
Key and centering hole
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
Concentricity tolerance
N
---
Corresponding key,
according to DIN 6885-A
(is not part of the scope of
supply of the motors)
5 × 5 × 20
6 × 6 × 32
10 × 8 × 45
8 × 7 × 40
Run-out and alignment tolerance
N
---
Centering hole, according
to DIN 332 part 2,
ed. 05.83
DS M5
DS M6
DS M10
DS M8
Advertisement
Table of Contents
