IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
6.3.5
X108, X109, communication output coupling
View
Female connector M12 (5‑pin, D‑coded)
Ready-made connection cable
The optional connection point X108/X109 is an additional Multi-Ethernet
interface used to connect components with Ethernet-based communication
(Sercos, PROFINET IO, EtherNet/IP, EtherCAT, POWERLINK) in distributed
form.
Tab. 6-23:
Communication output coupling
X108, X109
Connection
Signal name
1
2
3
4
5
●
RKB0043
(M12 → M12)
●
RKB0044
(M12 → RJ-45)
Tab. 6-24:
X108, X109; function, pin assignment, properties
Do not use angled connectors at the connection points.
Example of connection:
Function
Tx+
Transmit, Differential Output A
Rx+
Receive, Differential Input A
Tx-
Transmit, Differential Output B
Rx-
Receive, Differential Input B
Shield
Shield connection
(Only use shielded cables for which the
shield has been connected to ground
over the largest possible surface area via
the housing.)
R911335703_Edition 04 Bosch Rexroth AG
167/407
Connection points