Table of Contents
Advertisement
348/407
Commissioning, operation, diagnostics and maintenance
Color / flashing pattern
Off
Flashing green
Permanently lit green
Flashing red-green
Flashing red-green
Flashing red-green
Flashing red
Permanently lit red
Bosch Rexroth AG R911335703_Edition 04
LED H25, displays
1)
Safety technology status
(Safety Supervisor State / Event)
●
Not active
●
Safety bus communication not
configured
Active, no connection (safety default)
Active, at least one safe connection
●
Waiting for TUNID
●
Self test and initialization
●
Identifying the axis identifier
Indentifying the safety technology
TUNID
not yet set
2)
Abortion of connections
Critical error
1)
Flashing pattern: One square corresponds to a duration of
250 ms; the arrow marks the end of a cycle; abbreviations on
the squares: GN = LED permanently lit green, RD = LED per‐
manently lit red, -- = LED is off
2)
TUNID = Target Unique Network Identifier
3)
The LED display is only active with safety bus communication
via the master communication
Tab. 11-5:
LED display
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
3)
Connection status
●
Not ready
●
Safety bus communication not
configured
Ready and no active connection
Ready and at least one active connection
2)
●
Waiting for TUNID
●
Self test and initialization
●
Identifying the axis identifier
-
-
Faulty abortion of at least one active
connection
Critical connection error
3)
2)
Advertisement
Table of Contents
