Toro Workman GTX Service Manual page 161

Disassembly
1. Park vehicle on a level surface, stop engine, set
parking brake and remove key from the key switch.
2. Make sure that cargo bed is empty.
3. If necessary, remove cargo bed from vehicle (Fig.
46):
A. Raise cargo bed and support bed so that prop rod
assembly can be removed from bottom of bed.
B. Remove three (3) flange head screws that secure
prop rod U--bracket (item 12) to bed and remove
bracket and prop rod (item 5).
C. Lower cargo bed to vehicle frame.
D. Remove two (2) cap screws (item 1) and lock nuts
(item 10) that secure cargo bed assembly to frame.
E. Lift cargo bed assembly from vehicle.
4. Disassemble cargo bed as necessary using Figures
46, 47 and 48 as guides.
Assembly
1. Assemble cargo bed using Figures 46, 47 and 48 as
guides.
A. Use torque specifications that are identified in the
illustrations when assembling cargo bed.
2. If removed, secure cargo bed to vehicle (Fig. 46):
A. Position cargo bed assembly to vehicle.
B. Secure cargo bed assembly to frame with two (2)
cap screws (item 1) and lock nuts. Torque cap
screws from 140 to 170 in- -lb (16 to 19 N- -m).
C. Raise cargo bed and support bed so that prop rod
assembly can be secured to bottom of bed.
D. Make sure that end of prop rod (item 5) is installed
into slot in prop rod bracket (item 11) attached to
frame.
E. Secure prop rod U--bracket (item 12) and prop
rod to bed with three (3) flange head screws. Torque
screws from 133 to 147 in- -lb (15 to 16 N- -m).
F. Lower cargo bed to vehicle frame.
3. Adjust bed latch strikers (item 4 in Fig. 46) so that
cargo bed closes completely and is latched at both
sides. Strikers can be raised or lowered to latch bed.
Workman GTX Gasoline
90 to 110 in- -lb
(10.2 to 12.4 N- -m)
10
11
9
13
12
6
15
14
1. Cargo bed
2. Quick attachment
3. Jam nut
4. T handle
5. Screw
6. Flange head screw
7. Middle bed brace
8. Extended bed brace
1
2
133 to 147 in- -lb
(15 to 16 N- -m)
1. Tailgate lanyard
2. Shoulder screw (2 used)
Page 6 - - 49
133 to 147 in- -lb
(15 to 16 N- -m)
4
3
2
6
5
7
8 6
Figure 47
9. Latch
10. Grip
11. Shoulder screw (4 used)
12. Extension spring
13. Shoulder screw
14. Prop rod
15. Prop rod U- -bracket
4
2
3
Figure 48
3. Tailgate
4. Cargo bed
Chassis
1