Toro Workman GTX Service Manual page 120

Brakes (continued)
Problem
Brakes pull to either side.
Brakes squeal.
Brakes drag.
Brake pedal is hard to push.
Wheels lock--up when braking.
Brakes fade.
Vehicle surges at slow speeds and
chatters at fast speeds.
Chassis
Possible Cause
Tire pressure is incorrect or uneven between tires.
Brake pads are worn or contaminated.
Front wheel alignment (toe--in) is incorrect.
Brake rotors are bent or damaged.
Tires on same axle are unmatched.
Brake pads are worn or contaminated.
Brake components are dirty.
Brake rotors are scored or bent.
Parking brake is applied or incorrectly adjusted.
Brake pedal is binding.
Parking brake cable is binding.
Brake pads are saturated.
Floating calipers are binding due to dirt or corrosion.
Brake rotors are bent.
Incorrect brake pad material.
Brake pedal is binding.
New brake pads and/or rotors are not burnished.
Brake pads are worn or contaminated.
Wheel or transaxle bearings are damaged.
Calipers are binding due to dirt or corrosion in the float pins or
brake piston.
Brake rotors are worn.
Brake rotors are overheated.
Air is trapped in brake lines.
Excessive moisture in brake fluid.
Brake pads are saturated.
Brake rotors are bent or damaged.
Page 6 - - 8 Workman GTX Gasoline