Mitsubishi Electric 800 Series Instruction Manual (Function page 27

Hide thumbs Also See for 800 Series:
Table of Contents

Advertisement

 Basic operation (Ethernet model and safety communication model)
Operation mode switchover/Frequency setting
Network operation mode
First screen (Output frequency
*1
For the details of operation modes, refer to
*2
The monitor item can be changed. (Refer to
*3
Not displayed for the 575 V class.
*4
For the details of the fault history, refer to the Instruction Manual (Maintenance).
 Parameter setting mode
In the parameter setting mode, inverter functions (parameters) are set.
26
2. Basic Operation
2.1 Operation panel
(at power-ON)
PU operation mode
*1
Change the setting.
monitoring)
*2
(Output current
PU operation mode
Parameter clear
All parameter clear
Group parameter setting
(Example)
Blinking
Fault record 1
The last ten fault records can be displayed.
When the fault history is empty, only the fault number is displayed.
page
page
*1
Blinking
Second screen
monitoring)
*2
The present setting is
displayed.
Fault history clear
Automatic parameter setting
(Example)
*4
250.
308.)
PU Jog operation mode
Frequency setting written and complete
Third screen
(Output voltage
Change the setting.
Parameter write complete
Initial value change list
(Example)
Blinking
Fault record 2
Fault record 10
*4
*1
monitoring)
*2
Blinking
PM initialization
*3
Blinking
*4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fr-e800 seriesFr-e800Fr-e820-0008Fr-e840-0016Fr-e860-0017Fr-e820s-0008 ... Show all

Table of Contents