Mitsubishi Electric 800 Series Instruction Manual (Function page 531

 Functions available for the inverters manufactured in January 2021 or
later
Item
Position control (Vector control)
CC-Link IE TSN communication
specifications
EtherNet/IP communication
specifications
PROFINET communication
specifications
MODBUS/TCP communication
specifications
PTC thermistor
Backup/Restoration function
Increased magnetic excitation
deceleration
Optimum excitation control
PLC function
Capacity
Parameters
530
19. Appendix
19.4 How to check specification changes
Position control (Vector control) is supported for induction motors.
• The following parameters are added: Pr.420, Pr.421, Pr.423, Pr.425 to Pr.427,
Pr.430, Pr.446, Pr.464 to Pr.478, Pr.510, Pr.511, Pr.538, Pr.698, Pr.1222, Pr.1223,
Pr.1225 to Pr.1227, Pr.1229 to Pr.1231, Pr.1233 to Pr.1235, Pr.1237 to Pr.1239,
Pr.1241 to Pr.1243, Pr.1245 to Pr.1247, Pr.1249, Pr.1282, Pr.1283, Pr.1285,
Pr.1286, Pr.1289, Pr.1290, Pr.1292 to Pr.1297.
Position control is available.
• Setting values "3 to 5" added for Pr.800
Signals for position control can be assigned to I/O terminals.
• Setting values "76, and 87 to 89" added for Pr.178 to Pr.189
• Setting values "24, 36, 38, 56, 60 to 63, 84, 124, 136, 138, 156, 160 to 163, and 184"
added for Pr.190 to Pr.196 and Pr.313 to Pr.319
• Setting values "24, 36, 38, 56, 60 to 63, and 84" added for Pr.320 to Pr.322
Monitoring during position control is available (multifunction monitor).
• Setting values "26 to 31, and 65" added for Pr.52, Pr.774 to Pr.776, and Pr.992
• Setting value "65" added for Pr.54 and Pr.158
• Setting values "65, 222 to 227, and 229" added for Pr.1027 to Pr.1034
The following warnings are added: LP (Stroke limit warning), HP1 (Home position
return setting error), and HP2 (Home position return uncompleted)
The following faults are added: E.OD (Excessive position fault) and E.OA (acceleration
error).
User defined cyclic communication is supported.
• Setting values "38 and 138" of Pr.544 are available for remote registers.
User defined cyclic communication is supported.
• "Configurable" is added for the connections of Class 1 communication (I/O Message
communication) (Instances 100 and 150).
User defined cyclic communication is supported.
• Telegram 102 is added for Process Data (Cyclic Data Exchange).
CiA402 drive profile (24642 to 24644, 24646, 24648, 24649, and 26623) is added for
MODBUS registers.
Motor overheat protection by the motor's built-in PTC thermistor is supported.
• Pr.561 and Pr.1016 are added.
• Setting value "64" of Pr.52, Pr.774 to Pr.776, Pr.992, Pr.1027 to Pr.1034 is available
(multifunction monitor).
• E.PTC (PTC thermistor operation) is added.
Inverter parameters and the data used in the PLC function of inverter can be backed
up and restored.
• RD (Backup in progress) and WR (Restoration in progress) indications are added.
Added functions
• Pr.660 to Pr.662 are added.
The control can be enabled under Advanced magnetic flux vector control.
The structured text (ST) language is supported, and jump commands are supported.
200 V class: 11K to 22K are added.
400 V class: 11K to 22K are added.
Pr.375 added
User Defined Cyclic Communication Input/Output Mapping parameters (Pr.1318 to
Pr.1343) added
Details
Related
manuals
Connection/
Function/
Communication/
Maintenance
Function/
Communication
Communication
Communication
Communication
Connection/
Function/
Maintenance
Communication/
Maintenance
Function
Function
PLC Function
Programming
Manual
Connection/
Function/
Communication/
Maintenance
Function/
Communication