Mitsubishi Electric 800 Series Instruction Manual (Function page 254

 Operation mode switching method
When "0, 1, or 2" is set in Pr. 340
Switching through the network
Switch to External
operation mode through
the network.
Network operation
When "10 or 12" is set in Pr. 340
Network operation
NOTE
• For details on switching by external terminals, refer to the following pages.
PU operation external interlock (X12
PU/External operation switchover (X16
PU/NET operation switchover (X65 signal), External/NET operation switchover (X66
Pr.340 Communication startup mode
External operation
Switch to the Network operation
mode through the network.
Press on the PU to light
Press on the PU to light
signal)page 256
signal)page 257
selectionpage 260
Switching with the PU
Press
the PU to light
Press on
the PU to light
11. (D) Operation Command and Frequency Command
on
PU operation
PU operation
signal)page 258
11.1 Operation mode selection
11
12
13
14
15
16
17
18
19
20
253