Appendix B : Establishing The Upgrade Environment Through The Console Port; Setting Up An Environment For Upgrading System Software Using Telnet/Ssh - Huawei USG6000 Upgrade Manual

HUAWEI USG6000&USG9500
Upgrade Guide
|
| Press Ctrl+Z to Enter Diagnose Menu...
============================================================
Enter your choice(0-6):
2
Current boot application software: <hda1:/
V500R001C**.bin>
Current boot configuration: <hda1:/
vrpcfg_new.cfg>
<1> Modify
setting
<0>
Quit
Enter your choice (0-1):
1
After the setting is complete, enter 0 to return to the BootROM main menu.
Step 8 In the BootROM main menu, enter 0 to restart the device.
----End
1.6 Appendix B : Establishing the Upgrade Environment
Through the Console Port
1.6.1 Setting Up an Environment for Upgrading System Software
Using Telnet/SSH
Prerequisites
The prerequisites for console port login are as follows:
l
l
l
Context
IP address 192.168.0.1 has been set for interface GigabitEthernet 0/0/0 on the USG6000 by
default. You can use this IP address and the default user name admin and password
Admin@123 to log in to the CLI of the USG6000 through Telnet. If the Telnet configuration
Issue 01 (2018-01-16)
A PC (with RS232 serial port) and an RS-232 cable are available.
A terminal simulation program (such as Windows XP HyerTerminal) is installed on the
PC.
The USG6000 is powered on and running properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 USG6000
|
88