Device Serving As The Sftp Server To Upload Or Download Files Through Sftp - Huawei USG6000 Upgrade Manual

HUAWEI USG6000&USG9500
Upgrade Guide
Procedure
Step 1 Configure the FTP server.
Install the FTP server program on PC2 and configure the FTP server using the document
available with the program. Suppose that you obtain the FTP server program in a legitimate
way and description of the program is beyond the coverage of this document. Assume that an
FTP user already exists with the user name 123 and password 123, and that the root directory
of the user is set to the storage path of files to be uploaded/downloaded.
Step 2 Log in to the USG6000 from PC1 through Telnet/SSH.
Step 3 Log in to the FTP server on the USG6000.Run the ftp ip-address command in the user view
to establish an FTP connection to the PC and enter the FTP client view. The following
operation assumes that the IP address of the FTP server as 192.168.0.2.
<FW> ftp 192.168.0.2
Trying 192.168.0.2 ...
Press CTRL+K to abort
Connected to 192.168.0.2.
220 ready for new user
User(192.168.0.2:(none)):123
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
Step 4 Upload files in storage media of the USG6000 to the FTP server.Run the put local-filename
[ remote-filename ] command in the FTP client view to upload files to the FTP server.
[ftp] binary
mode.
[ftp] put
After the uploading is complete, check whether the sizes of files on the FTP server are the
same as those in the CF card. If no, re-upload the files to ensure that they are completely
uploaded to the FTP server.
Step 5 Download files from the FTP server to storage media of the USG6000.Run the get remote-
filename [ local-filename ] command in the FTP client view to download files from the FTP
server.
[ftp] binary
mode.
[ftp] get
After the downloading is complete, check whether the sizes of files in the CF card are the
same as those on the FTP server. If no, re-download the files to ensure that they are
completely downloaded to the CF card.
----End
1.7.2 Device Serving as the SFTP Server to Upload or Download
Files Through SFTP
Context
As shown in Figure 1, USG6000 serves as the SFTP server. Log in to the SFTP server from
the PC2 and upload/download files through SFTP. This method requires the third-party SFTP
client program (such as WinSCP) to be installed on the PC2.
Issue 01 (2018-01-16)
/Run the binary command to specify file transmission in binary
vrpcfg.zip
/Run the binary command to specify file transmission in binary
vrpcfg.zip
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 USG6000
97