Huawei USG6000 Upgrade Manual page 58

HUAWEI USG6000&USG9500
Upgrade Guide
Context
Figure 1-22 Flowchart of the version software upgrade through the Web
Procedure
Step 1 On PC2, open the Internet Explorer, access https://192.168.0.1, and enter user name admin
and password Admin@1234 to log in to the NGFW. User name admin and password
Admin@1234 are used as an example. You can set another user name and password as
required.
Step 2 Upload the system program.
Ensure that a configuration conversion tool is used to convert the original configuration file to
a configuration file applicable to the target version. For details, see Configuration Conversion.
After the upload succeeds, the Configuration File Management page is displayed. The
available configuration files are listed on the page. Check whether the size of the uploaded
file in the list and the size of the file on PC2 are the same. If no, upload the file again.
1.
Issue 01 (2018-01-16)
NOTICE
ChooseSystem > Configuration File Management. You can view configuration file
information in Current System Software and Next Startup System Software.
Figure 1-23 Viewing configuration file information
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 USG6000
49