Checking Whether Configurations Are Recovered - Huawei USG6000 Upgrade Manual

HUAWEI USG6000&USG9500
Upgrade Guide
Max input packet rate: 793306 packets/sec at 2016-01-28 19:28:32
Max output packet rate: -
Statistics last cleared:never

2.2.6.5 Checking Whether Configurations Are Recovered

Context
Run the compare configuration command in the user view to compare the current
configuration file with that saved on CF card 1 and check whether configurations are lost or
changed.
If no configuration is lost, the following is displayed:
<USG9500> compare configuration
Info:The current configuration is the SAME as the saved configuration!
If certain configurations are lost, the following shows that the underscored configurations are
lost (only the first difference is displayed; however, multiple differences may exist):
<USG9500> compare configuration
Warning:The current configuration is NOT the same as the saved configuration!
====== Current configuration line 13343
======
#-----end----
#
#*****begin****vfw1****#
#
firewall packet-filter default permit interzone local trust direction inbound
====== Configuration file line 13343
======
#-----end----#
The previous information serves as an example, and you should use actual display
information in the network environment.
It is recommended that you use Beyond Compare to compare the configuration files before
and after upgrade for any difference. If any configuration is lost, use the configuration file
before upgrade for recovery or contact technical support personnel.
Issue 01 (2018-01-16)
Last 300 seconds input rate: 834716840 bits/sec, 790451 packets/sec
Last 300 seconds output rate: 0 bits/sec, 0 packets/sec
Input: 2017488712530 bytes, 15284005410 packets
Output: 1906 bytes, 27 packets
Input:
Unicast: 15284005405 packets, Multicast: 0 packets
Broadcast: 5 packets, JumboOctets: 0 packets
CRC: 0 packets, Symbol: 0 packets
Overrun: 0 packets, InRangeLength: 0 packets
LongPacket: 0 packets, Jabber: 0 packets, Alignment: 0 packets
Fragment: 0 packets, Undersized Frame: 0 packets
RxPause: 0 packets
Output:
Unicast: 24 packets, Multicast: 0 packets
Broadcast: 3 packets, JumboOctets: 0 packets
Lost: 0 packets, Overflow: 0 packets, Underrun: 0 packets
System: 0 packets, Overruns: 0 packets
TxPause: 0 packets
Unknown Vlan: 0 packets
Input bandwidth utilization
Output bandwidth utilization : 0.01%
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 96.12%
2 USG9500
166