Huawei USG6000 Upgrade Manual page 102

HUAWEI USG6000&USG9500
Upgrade Guide
Procedure
Step 1 Run the terminal emulation program, such as the HyperTerminal of Windows XP, on the PC.
Choose Start > Programs > Accessories > Communications > HyperTerminal.
The Connection Description dialog box is displayed, as shown in Figure 2.
Figure 1-52 Upgrade topology through the console port
Step 2 Click OK and the Connect to dialog box is displayed. Select the serial port (such as COM1) of
the PC for connecting to the USG6000 from the Connect using drop-down list box, as shown
in Figure 3.
Figure 1-53 Connect to dialog box
Step 3 Click OK. The COM1 Properties dialog box is displayed. Set the communication parameters
of the port, as shown in Figure 4. The communication parameters of COM1 must be must be
consistent with those of the console port on the NGFW.
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 USG6000
93