Huawei USG6000 Upgrade Manual page 169

HUAWEI USG6000&USG9500
Upgrade Guide
l
l
l
l
l
l
Other parameters do not need to be specified, and you can adopt the default values.
Step 6 In the Ethernet submenu, enter 2 to download files from the FTP server.
Enter your choice(1-4): 2
boot device
unit number
processor number
file name
inet on ethernet (e) : 172.16.104.208
host inet (h)
gateway inet (g)
user (u)
ftp password (pw)
flags (f)
Loading.........................................................................
................................................................................
................................................................................
................................................................................
.....Done!
Writing to CFcard...Done!
Step 7 Repeat step 5 to set file name to license.txt. Other parameters do not need to be changed.
Step 8 Repeat step 6 to download license.txt to CF card 1. If the file of the same name exists on CF
card 1, the system displays a message to indicate whether to overwrite the original file is
displayed.
Step 9 Repeat step 5 to set file name to paf.txt. Other parameters do not need to be changed.
Step 10 Repeat step 6 to download paf.txt to CF card 1. If the file of the same name exists on CF card
1, the system displays a message to indicate whether to overwrite the original file is
displayed.
Issue 01 (2018-01-16)
the wanted one, you can modify it by enter the wanted file next to the existing one and
press Enter. This modification method is also applicable to the following parameters.
inet on ethernet (e)
Indicates the IP address of the USG9500. This IP address and that of the PC providing
FTP services should be on the same network segment.
host inet (h)
Indicates the IP address of the PC providing FTP services.
gateway inet (g)
Indicates the gateway IP address. When the USG9500 and PC are not on the same
network segment, specify this parameter.
user (u)
Indicates the FTP user name. The user name must have been specified on the PC
providing FTP services. The previous information takes 123 as an example.
ftp password (pw) (blank = use rsh)
Indicates the password of the FTP user. The password must have been specified on the
PC providing FTP services. The previous information takes 123 as an example.
flags (f)
Indicates the protocol adopted for downloading files. 0x0 indicates FTP, and 0x80
indicates TFTP. The previous information takes FTP as an example.
: motetsec0
: 0
: 0
: USG9520V500R001C80SPC100.cc
: 172.16.104.20
:
: 123
: ***
: 0x0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 USG9500
160