Huawei USG6000 Upgrade Manual page 122

HUAWEI USG6000&USG9500
Upgrade Guide
Command
undo ipv6 route-static track
bfd-session [ session-name
bfd-name ] admindown
invalid
display bgp ipv6 bfd session
{ [ vpnv6 vpn-instance vpn-
instance-name ] peer ipv6-
address | all }
display bgp ipv6 bfd session
all [ vpnv6 vpn-instance
vpn-instance-name ]
undo peer { ipv4-address |
ipv6-address } bfd block
undo peer { group-name |
ipv4-address | ipv6-
address } bfd enable
undo peer { group-name |
ipv4-address | ipv6-
address } bfd { min-tx-
interval min-tx-interval |
min-rx-interval min-rx-
interval | detect-multiplier
multiplier | wtr wtr-value } *
peer { group-name | ipv4-
address | ipv6-address } bfd
enable [ single-hop-prefer ]
undo peer { group-name |
ipv4-address | ipv6-
address } bfd { min-tx-
interval | min-rx-interval |
detect-multiplier | wtr } *
display ospfv3 [ process-id ]
bfd session [ interface-name
| interface-type interface-
number ] [ neighbor-id ]
[ verbose | all ]
bfd all-interfaces enable
Issue 01 (2018-01-16)
Description
The command deletes the
configured static routes.
The command displays
information about the BFD
session set up by BGP.
The command displays
information about the BFD
session set up by BGP.
The command restores a
peer to inherit the BFD
function from its peer group.
The command prohibits a
peer from inheriting the
BFD function from its peer
group.
The command restores
default values of BFD
detection parameters.
The command sets up a
BGP session for a peer or
peer group.
The command restores
default values of BFD
detection parameters.
The command displays
bidirectional forwarding
detection (BFD) session
information of all OSPFv3
processes.
The command enables BFD
in the IS-IS process.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 USG9500
Impact
None
None
None
None
None
None
None
None
None
None
113